Electronics International MVP-50P User Manual

Page 50

3. To detect a cylinder operating abnormally hot, you may want to set a red color range for each cylinder
From approximately 30°F above peak EGT To a temperature well above any normal reading (approx.
2000°F).

Note: Blue, orange and pink colors should not be used as one of the EGT color ranges.

Set the CHT color ranges for each cylinder as follows:

1. Set a green color range From 0°F To the maximum CHT
limit for your engine.

2. If your engine has a cautionary operating range, set a
yellow color range From the cautionary operating range To the
maximum CHT limit for your engine.

3. Set a red color range From the maximum CHT limit for
your engine To a temperature well above any normal reading
(approx. 550°F).

Note: Orange or pink should not be used as one of the CHT
color ranges.

Red & Yellow Ext Warning Logic”: The External Caution and/or Warning Lights may be setup as follows:

“Disabled” -

This setting will disable any external warning.

“Off With Ack” -

This setting turns off any external warnings once they have been acknowledged.

“Sdy On With Ack” -

This setting keep all external warnings steady on once they have been
acknowledged.

“Yellow Off With Ack” - This setting turns off all yellow extenal warnigs when acknowledged but keeps

all red external warnings steady on. This is the perferred setting.

“Voice Warning File”: This line sets the voice file that will be played when a red and/or yellow warning is reached
(as determined by the “Red & Yellow Ext Warning Logic” setting).