Electronics International MVP-50P - Manual (Page 34)

32
Reading a General Info File from a USB Data Stick: A Gen Info File may be read from a USB Data Stick
and stored into MVP memory by pushing the Menu button while viewing a Gen Info File, rotating the Select knob to
select “Read Files From USB” near the bottom of the screen and pressing the Select knob to perform this function.
Save a General Info File to a USB Data Stick: A Gen Info File may be saved to a USB Data Stick by pushing
the Menu button while viewing the Gen Info File to be saved, rotating the Select knob to select “Save This File to
USB” near the bottom of the screen and pressing the Select knob to perform this function.
Deleting a Checklist: A Gen Info File may be deleted from MVP memory by pushing the Menu button while
viewing the Gen Info File to be deleted, rotating the Select knob to select “Delete This File” near the bottom of the
screen and pressing the Select knob to perform this function.
4.11 “Data Logs” Screens:
There are three data log screens available: Flight-Log, Max-Log and Min-Log. To access the different screens
press the Menu button while viewing a Data Log screen. Also, there is a selection to save the current screen to the
USB Data Stick.
Flight-Log: The Flight-Log records the Date, Start Time, Flt #, and Flt Tm for each flight. The last 500 flights are
displayed. A flight is based on the Flight Timer. One minute after the Flight Timer starts the MVP records the
Date, Start Time and Flight #. When the Flight Timer stops, the MVP records the Flight Time and appends the
record to the Flight-Log and stores it to permanent memory.
Max-Log: The Max-Log records the maximum values (for a preset number of functions) reached during a flight.
The last 500 flights are displayed. A flight is based on the Flight Timer.
Min-Log: The Min-Log records the minimum values (for a preset number of functions) reached during a flight.
The last 500 flights are displayed. A flight is based on the Flight Timer.