Teledyne 7500ZA - Infrared Gas Analyzer - Manual (Page 23)

NDIR Gas Analyzer Instalation
Teledyne Analytical Instruments 7
Installation
Installation of the Model 7500ZA NDIR Analyzer includes:
 Unpacking
 Mounting
 Gas connections
 Electrical connections
 Calibration
DANGER: THIS UNIT IS NOT AN EXPLOSION-PROOF
INSTRUMENT. DO NOT USE IT IN A PLACE WITH
EXPLOSIVE GASES TO PREVENT EXPLOSION, FIRE
OR OTHER SERIOUS ACCIDENTS.
CAUTION: ENTRUST THE INSTALLATION, MOVEMENT OR RE-
INSTALLATION TO A SPECIALIST OR THE
SUPPLIER. A POOR INSTALLATION MAY CAUSE
ACCIDENTAL TIPOVER, ELECTRIC SHOCK, FIRE,
INJURY, ETC.
• The gas analyzer is heavy. It should be installed with utmost
care. Otherwise, it may tip over or fall, causing accident or
injury.
• For lifting the gas analyzer, be sure to wear protective gloves.
Using bare hands may result in injury.
• This unit should be installed in an environment conforming to
the conditions noted in the instruction manual. Otherwise,
electric shock, fire or other malfunction of the unit may occur.
• During installation, care should be taken to keep the unit free
from entry of chips, dust, and debris. Otherwise, it may cause
fire, trouble or malfunction of the unit.
The analyzer is shipped with all the materials you need to install
and prepare the system for operation. Carefully unpack the transmitter
and inspect it for damage. Immediately report any damage to the
shipping agent.