Luminex xPONENT for MAGPIX User Manual

Page 94

• Batch Audit

• Patient Report

If you choose Data Interpretation, a Select Analytes section appears on the right and
displays a list of the analytes in the batch. Select the analytes you want to include in the
report. Select All to select all the analytes in the list. Select Clear to clear all the analytes
in the list.

A series of new buttons appears when you click Generate Report:

• Analyte arrows - This feature is directly below the Report list. Use the left and right

arrows to display information for individual analytes of those selected for the report.

• Page arrows - use the arrows to scroll through the pages being displayed.

• Save All - Click to open the Browse For Folder dialog box. Select a location to save the

file, and click OK. This file includes all selected analytes.

• Print All - Click to print the information for all the analytes in the report.

• Save - Click to open the Save As dialog box. Select a location and click Save. This saves

only the analyte information currently being viewed.

• Print - Click to print the analyte information currently being viewed.

• New Report - Click to return to the main Reports window.

NOTE: If running a data interpretation of an allele call batch report, be aware

that when choosing analytes from the Select Analytes list, selecting
one analyte will select all analytes in that group.

Protocol Reports - A list of protocols displays. Choose from the following reports:

• Protocol Settings

• Plate Layout

• Protocol Audit

Select a protocol and then click Generate to generate the report.

Calibration and Verification Reports - Displays a list of calibrations and verifications.
Choose from the following selections:

CALVER - Select a calibration component, a date from the Date list, and click Generate to
generate the report.

Performance Verification Reports - Displays two report types. Choose either of the
following:

• Condensed

• Detailed

Select a report type, a date range from the Date list, and click Generate to generate the
report.

System Log Reports - Displays a list of system log reports. Choose from the following
selections:

• All

• Maintenance

• Security

• Warning and Errors

Using xPONENT