Liquid Controls DMS Delivery - Manual (Page 4)

4
Introduction
LectroCount Data Management System
DMS Menu
DMS Office Program
LCR Host DMS Delivery LCP File Server
The LectroCount DMS is a “Data Management System.”
Using recorded data from a metering system, the DMS
receives, organizes and manipulates the data into
valuable operational and accounting applications.
The system consists of a hardware component and five
function specific software applications. The DMS Module,
the hardware component, serves as the interface
between the printer, power supply, DMS Lap Pad, and
LectroCount registers. The software components of DMS
include: DMS Menu, LCR Host, DMS Delivery, LCP File
Server, and DMS Office Program.
This publication covers the DMS Menu and DMSDelivery
applications only.
DMS Menu: Allows the operator to switch between LCR
Host, DMS Delivery, and LCP File Server. DMS Menu
can also transfer transactions to the office computer
and receive information from the office computer.
DMS Menu instructions begin on page 11.
LCR Host: Enables the operator to setup an LCR
Network, calibrate a LectroCount electronic register
and meter, and make deliveries.
LCR Host instructions are in the LectroCount DMS
Setup and Operation Manual: EM200-11.
DMS Delivery: Enables the operator to select customers
from a customized list, make deliveries, record and
track deliveries, review shift information, and transmit
completed delivery information to the DMS Office
Program using a USB flash memory device.
DMS Delivery instructions begins on page 19.
LCP File Server: Allows access to files from the DMS
Module via other computer systems in a manner
similar to that of Windows
® Explorer. Files on other
devices that are running LCP File Server are also
accessible.
LCP File Server instructions are in the LectroCount
DMS Setup and Operation Manual: EM200-11.
DMS Office Program: This Windows ® program runs on
the office PC. It is used to configure the DMS Delivery
application and customize delivery tickets. It also
formats the data files between the back DMS Office
program and the DMS Module.
DMS Office Program instructions are in the Office
Installation & Operation Manual: EM200-13
Other LectroCount DMS publications include:
• LectroCount DMS Installation Manual: EM200-10
• Quick Reference Card: 500345
Windows ® is a registered trademark of Microsoft Corporation.