Liquid Controls FlightConnect 600 - Manual (Page 9)

9
Screen Pointer
on the Next/Previous Screen line
in position for a screen change
navIgatIng from Screen to Screen
The LCR 600 contains eight groups of screens:
FlightConnect Screens, General Setup, System Setup,
Calibration Setup, Diagnostics, Security, File System,
and Machine Status. Once a group of screens is
opened, you can rotate through the screens in the group
by selecting the Next/Previous Screen field at the
bottom of the screen.
The Configuration Menu serves as a hub for opening
a screen group (excluding the FlightConnect Screens).
The Configuration Menu is included in the rotation of
each group of screens. It can also be opened by turning
the red selector switch to the calibration position or by
selecting Configuration Menu in the FlightConnect
Fueler Menu.
To move from one screen to another:
1. Move the pointer to the bottom line of the screen: Next/
Previous Screen
2. Press the nExt or the PrEv button to navigate to the
next screen or the previous screen.
------------- or -------------
1. Move the pointer to any field in the Configuration Menu
screen.
2. Press the EntEr button to open the screen.
lcr 600 InStrumentS and controlS -
IntroductIon
C O N F I G U R A T I O N M E N U
General Setup
System Setup
Calibration Setup
Diagnostics
Security
Setup FlightConnect
File System
Machine Status
Next/Previous Screen
Press PREV/ESC button while pointer
is on the Next/Previous Screen line
to navigate to the previous screen
Press NEXT/ENTER button while pointer
is on the Next/Previous Screen line
to navigate to the next screen