Liquid Controls FlightConnect 600 - Manual (Page 30)

30
fueler logon
Upon powering up the LCR 600, after FlightConnect setup is complete, the
Fueler ID screen will appear. After entering a valid Fueler ID and a password
(if required), the Fueler Menu will appear. If the previous fueler did not logoff
before the LCR 600 powered down, the Fueler Menu will be the first screen to
appear.
Scheduled and manual fueling
Before FlightConnect will allow a fueling, details about the aircraft and the pending fueling must be entered into
FlightConnect. FlightConnect combines these details with the metrological data of the fueling, prints them on the
ticket, saves them as a data record, sends them to the office where they can be recorded in the company books.
There are two methods of entering aircraft and fueling details into FlightConnect, a scheduled fueling and a manual
fueling. The details of a scheduled fueling are defined in the office using FlightConnect Dispatch software and
then wirelessly sent to the LCR 600. The details of a manual fueling are defined by the fueler through a series of
preconfigured FlightConnect data field screens.
After the fueler accepts a scheduled fueling or completes the series of FlightConnect data field screens, FlightConnect
will display the New Fueling screen. The New Fueling screen displays a list of the fueling details—defined in
FlightConnect Dispatch or by the fueler in FlightConnect 600. From the New Fueling screen, fuelers can start fueling,
or they can scroll through the list, select a field, reenter a new value, and then start fueling.
fueler menu
The Fueler Menu is the hub for all FlightConnect operational functions. From
the Fueler Menu, fuelers can start scheduled and manual deliveries, logoff,
send and retrieve data wirelessly from the office, and enter the Configuration
Menu. To select a function, use the arrow buttons to scroll move the
highlighted bar and the EntEr button to select the highlighted function. An
indicator arrow will appear on the right side of the black header bar when
fueling transactions are available to send to the office.
Scheduled Fueling
Manual Fueling
Fueler Logoff
Database Management
Configuration Menu
G a l l o n s
F u e l e r M e n u
Header
Highlighted Function
Indicator Arrow
Transaction records available for office
If the Fueler ID or Fueler
Password entered is not in the
FlightConnect database, an error
message will appear. Press ESC
to return to the Fueler ID screen
G a l l o n s
F u e l e r I D
G a l l o n s
F u e l e r P a s s w o r d
To logon to FlightConnect:
1. Enter the fueler’s Fueler ID.
2.
Press the EntEr button to accept the value.
3. Enter the fueler’s Fueler Password. The password
screen only appears if a password was entered into the FlightConnect
database.
4. Press the EntEr button to accept the value.
operatIon -
fueler logon, fueler logoff, & fueler menu
fueler logoff
The Fueler Logoff command logs off the active fueler and prints a shift ticket.
FlightConnect will continue adding fuelings to the shift until the active fueler is
logged off.
To logoff FlightConnect:
1. From the Fueler Menu, move the highlighted bar to Fueler Logoff and press the
EntEr button.
2. Select Yes and press the EntEr button.
No
Yes
G a l l o n s
L o g o f f ?