Liquid Controls FlightConnect 600 - Manual (Page 4)

4
IntroductIon -
flIghtconnect lcr 600 overvIeW
general InformatIon
This manual provides instructions for the initial setup, the
calibration, and operation of the LectroCount LCR 600s
with FlightConnect application software.
The Liquid Controls LectroCount LCR 600 is a
microprocessor-based electronic flowmeter register.
Its primary functions consist of configuring the
flowmeter system to the properties of the liquids to be
measured, interfacing with the electronic components
of the flowmeter system components (and external
components such as pumps, injectors, and shutdown
devices), and performing Weights & Measures approved
custody transfer actions.
The LCR 600 controls a flowmeter system as a stand-
alone unit and is well-suited for mobile and fixed
installations.
The LCR 600 is a self-contained unit. All operation,
setup, and configuration functions can be entered
using the LCR 600’s red selector switch and the
alphanumeric keypad. No lap pads, laptops, or other
data entry devices are required; however, a Windows ® -
based interface, EZCommand, is available to save and
distribute settings and updates to all of the LCR 600s in
a FlightConnect system.
FlightConnect LCR 600 is an automated data capture
and data management system for into-plane fueling
operations. FlightConnect collects the details of each
fueling and wirelessly transmits the fueling data to the
office.
FlightConnect limits fuelers to aviation-specific data entry
and fueling screens. Data entry screens are configured
during setup.
Fueler functions can be limited to: log on, log off, manual
and/or scheduled fueling, and send/receive data. By
limiting the fuelers to these basic functions, operating
FlightConnect is simple. Commands are entered using
the LCR 600 keypad or red selector switch. Other
devices, such as handheld and in-cab equipment, are
not needed.
lcr 600 baSIc functIonS
• Calibration (single and multipoint)
• Weights & Measures custody transfer
(product fueling and ticket generation)
• Metrological data collection
• Security settings
• Valve control (with proper accessories)
• Electronic temperature volume compensation (ETVC)
(with proper accessories)
• Differential pressure (ΔP) shutdown
(with proper accessories)
flIghtconnect lcr 600 functIonS
• Wireless transmission of fueling data
• Scheduled (dispatch) fueling data entry
(fueling data transmitted wirelessly from
central dispatcher to LCR 600)
• Manual fueling data entry
• Fueling data in .csv or .xml data formats
• Data fields available
• Additive
• Airport Codes (origin and destination)
• Aircraft Type
• Comment
• Customer
• Flight Number
• Fueling Location
• Fuel Type
• Load Location
• Tail Number
• Transaction Type
• 3 Miscellaneous Text Screens (user setup and defined)
lectrocount flightconnect lcr 600 overview
flIghtconnect offIce and dbmanager
FlightConnect LCR 600 works in conjunction with two software packages, FlightConnect Office and DBManager.
Both software packages are installed on an office computer. FlightConnect Office includes Flight Connect Read, a file
conversion program; FlightConnect Edit, a database management interface; and FlightConnect Dispatch, an interface
that configures and wirelessly dispatches scheduled fueling assignments to LCR 600s on the tarmac. DBManager
includes LCP Setup, a program for configuring communication settings, and DBManager, a program that identifies
LCR 600s, prepares file paths, schedules data transmissions and transmits data between the office and the LCR
600s.