Liquid Controls FlightConnect 600 - Manual (Page 8)

8
Calibration #: 4
Calibration Code:
Calibration Name:
Calibration Type:
Linearization Mode:
Gallons
AV1
Jet A1
Aviation
Setup
C A L I B R A T I O N S E T U P 1
C a l i b r a t i o n N a m e
Press 1-5 Home ◄— Ins —► End
Code:
Press 6-0 Cap ↑ Clear Del Sym
IntroductIon -
lcr 600 InStrumentS and controlS
Text Buttons
Navigation Buttons
Calibration #: 4
Calibration Code:
Calibration Name:
Calibration Type:
Linearization Mode:
Gallons
AV1
Jet A1
Aviation
Setup
C A L I B R A T I O N S E T U P 1
C a l i b r a t i o n N a m e
Press 1-5 Home ◄— Ins —► End
Code:
Press 6-0 Cap
↑
Clear Del Sym
Calibration #: 4
Calibration Code:
Calibration Name:
Calibration Type:
Linearization Mode:
Gallons
AV1
Jet A1
Aviation
Setup
C A L I B R A T I O N S E T U P 1
C a l i b r a t i o n N a m e
Press 1-5 Home ◄— Ins —► End
Code:
Press 6-0 Cap
↑
Clear Del Sym
Text Buttons
Navigation Buttons
Text Buttons
Navigation Buttons
fn box
The Fn command (on the up arrow button) provides a
set of commands and additional characters that can be
used while a text box is open.
to activate an fn command or insert an fn
character:
1. Tap the Fn button twice to bring up the Fn box.
2.
Press the alphanumeric button that corresponds to the
command (pictured below) to initiate command.
multItap functIonalIty
While a text box is open, characters can be entered
into the field using the alphanumeric buttons (and the
down button). The character entered into the text box
depends on the number of times the button is pressed
successively.
Alphanumeric Buttons
Fn Button
Display Screen with Fn Commands
Fn Box
Press the  button once to backspace
in a text box
3. Press the Sym (9) button to open the symbols menu.
4. Press the  and  buttons to scroll through the symbols.
5. Press the EntEr button to accept the highlighted
command or character.