ADC Campus-REX2 RS - Manual (Page 81)

Chapter 4 - Managing System Parameters
Campus-REX2 RS Interface Card User Manual 69
S ETTING A P ASSWORD
A password prevents unauthorized access to Campus-REX2 configuration
options via console port, TELNET, or remote Campus login. This password
also controls access to the Campus-REX2 via FTP as required for software
upgrade (see
“Upgrading Campus Unit Software” on page 92 ). You can set a
password with any combination of up to ten letters or numbers, but the first
character must be a letter. Passwords are case-sensitive.
From the System Parameters menu, type then press . At the prompt,
enter a password that contains up to 10 ASCII characters.
ENTER NEW PASSWORD (10 characters maximum):
*********
The new password takes effect immediately after it is entered and a save
command is not required.
If you forget your password and cannot log onto the
Campus-REX2, use the LCD to restore the configuration
settings to their factory default values. This removes the
password. For more information, see
“Restoring the System
to Default Values” on page 108 .
5 ENTER