Configuring hdsl parameters, Accessing hdsl configuration, Hdsl p – ADC Campus-REX2 RS User Manual
Page 32: Onfiguring, Arameters
Chapter 2 - Configuring HDSL Parameters
20
Campus-REX2 RS Interface Card User Manual
C
ONFIGURING
HDSL P
ARAMETERS
Access the HDSL configuration screen, then configure parameters.
Accessing HDSL Configuration
From the Main Menu (
), type
then press
to access the
System Settings Menu.
From the System Settings Menu, type
then press
to access the
HDSL Parameters screen. From this screen, you can configure or change
values. Standard Mode is the default HDSL Parameters screen.
3
ENTER
Jul 07, 2003
ADC TELECOMMUNICATIONS, CAMPUS RS, Version 5.1 08:19:34
Local Unit ID:
Local I/F:
REX2
Remote Unit ID: Inactive
Remote I/F: Inactive
Circuit ID:
SYSTEM SETTINGS MENU
1)
SYSTEM PARAMETERS
2)
HDSL PARAMETERS
(R)eturn
ENTER CHOICE>
2
ENTER
Jul 07, 2003
ADC TELECOMMUNICATIONS, CAMPUS RS, Version 5.1 08:19:34
Local Unit ID:
Local I/F:
REX2
Remote Unit ID: Inactive
Remote I/F: Inactive
Circuit ID:
STANDARD MODE HDSL PARAMETERS
1) HDSL Operating Mode:
Standard
(Standard, Extended)
2) Transceiver Mode:
Auto
(Auto, Master, Slave)
3) HDSL Rate:
T1
(T1, E1, 768)
Enter (S)ave to apply changes !
(S)ave
(R)eturn
(M)ain Menu
ENTER CHOICE>