ADC Campus-REX2 RS User Manual
Page 66
Chapter 3 - Configuring the REX2
54
Campus-REX2 RS Interface Card User Manual
2
To select DHCP Relay, type
then press
. The following fields,
2 and 3, are added to the screen as shown below.
3
To enter the IP address for the primary DHCP server to which the
Campus-REX2 relays requests, type
then press
. At the
prompt, enter the IP address.
Required format is nnn.nnn.nnn.nnn
Enter Primary DHCP Server:10.0.0.26
To delete a DHCP server, enter the IP address 0.0.0.0. If the primary
DHCP server is deleted and a valid secondary DHCP server is defined,
the secondary DHCP server automatically becomes the primary DHCP
server.
4
To enter the IP address for the secondary DHCP server to which the
Campus-REX2 relays requests, type
then press
. At the
prompt, enter the IP address.
Required format is nnn.nnn.nnn.nnn
Enter Secondary DHCP Server:192.150.0.54
To delete a DHCP server, enter the IP address 0.0.0.0. If the primary
DHCP server is deleted and a valid secondary DHCP server is defined,
the secondary DHCP server automatically becomes the primary DHCP
server.
5
Type
then press
to return to the Router Configuration screen
). (Typing
will return you to the Main Menu.)
1
ENTER
Jul 07, 2003
ADC TELECOMMUNICATIONS, CAMPUS RS, Version 5.1 08:19:34
Local Unit ID:
Local I/F:
REX2
Remote Unit ID:
Remote I/F: REX2
Circuit ID:
DHCP SERVICES
1) Service:
Relay
(None, Relay)
2) Primary DHCP Server:
0
.0
.0
.0
3) Secondary DHCP Server:
0
.0
.0
.0
(R)eturn
(M)ain Menu
ENTER CHOICE>
2
ENTER
3
ENTER
R
ENTER
M