Product compatibility, Compatibility with earlier campus products, Roduct – ADC Campus-REX2 RS User Manual
Page 148: Ompatibility
Chapter 8 - Internetworking and Management Overview
136
Campus-REX2 RS Interface Card User Manual
P
RODUCT
C
OMPATIBILITY
The following sections describe the compatibility among versions of Campus
products.
Compatibility with Earlier Campus Products
When mated with a Campus-RS desktop unit or Campus-RS line unit, the
Campus-REX2 RS Interface Card is compatible, over the HDSL link, with
earlier versions of Campus products, such as the Campus-T1, Campus-E1,
and Campus-768, as shown in the following illustration.
All earlier versions of Campus products are manufactured to operate at a
single HDSL transmission rate, while the Campus-RS transmission rate is
user-selectable. To support compatibility with earlier Campus Products, the
following configuration options must be set on the Campus-REX2:
•
Set the HDSL Operating Mode to Standard Mode.
•
Set the Standard Mode HDSL Rate to T1, E1, or 768, to match the rate
of the earlier product.
For information on setting these options, see
.
Campus-REX RS
Interface card
Campus-REX T1,
Campus-REX E1, or
Campus-REX 768
Campus-RS
Campus-T1, Campus-E1 or
Campus-768
HDSL