Hach-Lange TITRALAB 840_845 Reference Manual - Manual (Page 88)

Titra Lab ® TitraLab 840 and 845 Reference Manual
Page 88
Electrode
identification An electrode is identified by its name (ID). The ID and other electrode
specifications are entered in the Edit Electrode menu. These other
parameters are :
• Type
• Address
Electrode
library To access, press 4 in Electrode window.
The electrode library comprises the following menus and commands:
Figure 16: Electrode library overview
Electrode not
calibrated The electrode has not been calibrated and there is no electrode data
stored in the archives. Press
✓ and calibrate the electrode.
Electrode
system An electrode system comprises all the electrodes necessary to run a
method or a sequence of methods.
Electrode
library
New
electrode
Default
parameters
Delete
electrode
Edit electrode
Calibration parameters
Calibration solutions
Results
Commands/
actions
Programming
data
Printouts