Hach-Lange TITRALAB 840_845 Reference Manual - Manual (Page 147)

Titra Lab ® TitraLab 840 and 845 Reference Manual
Page 147
Reagent
calibration
parameters This menu contains the general parameters concerning the reagent
calibration method (identification of the electrodes used in particular).
Titration parameters necessary to run the calibration are also
programmed.
Do not forget to select the electrode and temperature sensor
created in this menu!
To access:
1. From the Reagent window, press 5.
2. Select the reagent to be edited.
3. Press 2 Edit reagent and check that the
Titre = Calibrate option has been selected.
4. Edit the calibration general parameters.
5. Use the LEFT/RIGHT arrow keys to move to the last Edit reagent
display.
6. Press 1 Calibration parameters.