Hach-Lange TITRALAB 840_845 Reference Manual - Manual (Page 164)

Titra Lab ® TitraLab 840 and 845 Reference Manual
Page 164
Running a
method (steps
10 to 12) Before starting:
see "Running a method (preliminary steps)", page 162 ,
see "Running a method (steps 6 to 9)", page 163 .
10. End of measurements:
11. After having saved the test 1 results, (step 11):
12. After having saved the last test results:
Refer to "Running a method (last steps)", page 165 .
At the end of the measurements or
titration, the test results are
displayed. You can:
- press 1 to save the test results
and continue,
- press 2 More info to view statis-
tics, recalculate a result or view the
direct curve (titration method only).
Run new tests on the same
sample, if wished:
press 1 New test and repeat steps
9 to 11 for the other tests.
Run new samples, if wished:
press 2 New sample. The sample
results screen are displayed with
the mean and standard deviation of
each result if several tests (repli-
cates) have been performed for
that sample.
Press
✓ and repeat steps 8 to 12
for the other samples.