Hach-Lange TITRALAB 840_845 Reference Manual - Manual (Page 13)

Titra Lab ® TitraLab 840 and 845 Reference Manual
Page 13
Introduction
The TitraLab 840 and 845 Titration Workstations are dedicated for routine use. They offer two
distinct user levels:
• Supervisor
Dedicated for operators who wish to edit their methods to fit their specific needs. They can
also assign a password to protect the programmed data from eventual changes.
• Routine
Dedicated for operators wishing to use the routine functions to guide them step by step
through the analyses.
The TIM840 and TIM845 can store up to 10 methods, 15 electrodes and 15 reagents.
Thanks to the preprogrammed applications, the Titration Manager is ready for use as soon as
it has been installed.
Refer to "Appendix 1: Preprogrammed methods", page 199 .
The TIM840 and TIM845 also allow you to automatically sequence and repeat measurements
- ideal for direct measurements followed by a titration.
The purpose of the TitraLab 840 and 845 Reference Manual is to give detailed information on
the Titration Workstation and the data displayed during operations. The information is listed in
alphabetical order for quick access and cross-references are listed in italics.
In addition to this handbook, a general User’s Guide (part no. D21T065) is available giving
descriptions and overviews of the workstation menus and operating concepts to guide you
through programming and running of the analyses.