Clear-Com HME DX100 - Manual (Page 5)

SECTION 1. INTRODUCTION
The DX100 provides private, secure communication. Each base station can have up to a total of fifteen BP200
Beltpacs, WH200 All-in-one Wireless Headsets and/or WS200 Wireless Speaker Stations “registered” to it. All
Beltpacs or all WH200 Headsets, or a combination of Beltpacs, Headsets and/or Speaker Stations can be used.
Four of the fifteen Beltpacs, Headsets and/or Speaker Stations can transmit at the same time.
Beltpacs/Headsets/Speaker Stations can be used either in the Push-To-Talk (PTT) or Hands-Free (HF) mode.
The base station operator can stop any Beltpac/Headset/Speaker Station from transmitting.
The MB100 Base Station and WS200 Speaker Station can be operated using standard AC electricity, an external
DC power source or six AA batteries. A power supply, cable and a battery sled are included with the base station.
This is an example of a typical theatrical application. A variety of other uses for the DX100 are possible.
1