Clear-Com HME DX100 - Manual (Page 34)

30
Beltpac
Frequency Range: 2400 MHz – 2483.5 MHz
Antenna: Internal, horizontal/vertical diversity
RF Sensitivity: <
−90dBm w 10 -3 BER
Battery Requirements: 3.6V lithium ion, rechargeable
to 14 hours, PTT – up to 20 hours
)
32
Ω
Indicators: Dual-color LED (red/green)
WH
Frequency Response: 200 Hz to 3.5 kHz
Transmit Power: 100mW burst
Battery Life: Hands-free – up
Temperature Range: 32-122°F (0-50°C
Weight: 7.4 oz (.21 kg) with battery and pouch
Headset Connector: 4-pin, mini-DIN
Microphone: Electret
Headset Output:
160mW into
Controls: Power, Volume-up S, Volume-down T, IC, ISO
200 Headset
Frequency Range: 2400 MHz – 2483.5 MHz
Antenna: Internal
Frequency Response: 200 Hz to 3.5 kHz
Transmit Power: 100mW burst
RF Sensitivity: <
−90dBm w 10 -3 BER
Battery Requirements: 3.6V lithium ion, rechargeable
Battery Life: Hands-free – up to 14 hours, PTT – up to 20 hours
°F (0-50°C)
16 kg) with battery
olume-up S, Volume-down T, IC1, IC2, ISO
Indicators: Transmit LED (red/green), Power LED (red/green)
peaker Station
Temperature Range: 32-122
Weight: 5.7 oz (.
Microphone: Electret
Headset Output:
160mW into 32
Ω
Controls: Power, V
S
Frequency Range: 2400 – 2483.5 MHz
Antenna: Internal
Frequency Response: 200 Hz to 3.5 kHz
Power Requirements: Six AA batteries (NiMH optional),
or 100-240VAC, 50-60Hz
1.5W min into 8
Ω
Headset Output: 200mW into 32
Ω
aker, ISO, Volume-down T, Volume-up S, IC
NOTE: Communicators will follow the frequency range determined by the setting on the Base Station
(e.g. All, Low or High).
*
*
*
*
12-14VDC
Temperature Range: 32-122°F (0-50°C)
Size: 9.38” x 5.16” x 3.34” (23.83 x 13.11 x 8.48 cm)
Weight: 2.56 lb with battery (1.16 kg)
Microphone: Electret
Speaker:
Controls: Power, Spe
Indicators: Power LED (red), Call LED (yellow), Speaker LED (red),
ISO LED (red/green), IC LED (red/green)
Connectors: 4-pin mini-DIN Headset, 12-14VDC, 8
Ω speaker