GF Signet 8350 Temperature Transmitter User Manual

GF Signet Tools

Signet 8350-3 Temperature Transmitter

Temp1: 25.0 ˚C
Temp2: 25.0 ˚C

ENTER

Signet Temperature

Transmitter

CAUTION!

• Remove power to unit before wiring input and output connections.
• Follow instructions carefully to avoid personal injury.

Contents

1. Specifi cations
2. Installation
3. Electrical Connections
4. Menu Functions

2. Installation

• ProcessPro transmitters are available in two styles: panel mount and fi eld mount. The panel mount is supplied with the necessary

hardware to install the transmitter. This manual includes complete panel mounting instructions.

• Field mounting requires one of two separate mounting kits. The 3-8052 integral kit joins the sensor and instrument together into a

single package. The 3-8050 Universal kit enables the transmitter to be installed virtually anywhere.

• Detailed instructions for integral mounting or other fi eld installation options are included with the 3-8052 Integral kit or the 3-8050

Universal kit.

2.1 Panel Installation
1. The panel mount transmitter is designed for installation using a 1/4 DIN Punch. For manual panel

cutout, an adhesive template is provided as an installation guide. Recommended clearance on all sides
between instruments is 1 inch.

2. Place gasket on instrument, and install in panel.
3. Slide mounting bracket over back of instrument until quick-clips snap into latches on side of instrument.
4. To remove, secure instrument temporarily with tape from front or grip from rear of instrument. DO NOT

RELEASE.

Press quick-clips outward and remove.

92 mm
(3.6 in.)

97 mm

(3.8 in.)

56 mm
(2.2 in.)

41 mm
(1.6 in.

)

Optional
Rear
Cover

96 mm

(3.8 in.)

96 mm
(3.8 in.)

106 mm
(4.18 in.)

82 mm
(3.23 in.)

SIDE VIEW

Field Mount w/

8052 Integral kit

107 mm

(4.2 in.)

96 mm

(3.8 in.)

Panel Mount

SIDE VIEW

FRONT VIEW

Field Mount &

Panel Mount

SIDE VIEW

Field Mount w/

8050 Universal base

*3-8350.090-3*

3-8350.090-3 Rev. J 01/13 English

English

1. Specifi cations

General
Compatibility:

Signet 2350 Temperature sensors

System accuracy:

±0.5 ºC with 2350 sensors

Enclosure:
• Case:

PBT

• Panel case gasket:

Neoprene

• Window:

Polyurethane coated polycarbonate

• Keypad:

Sealed 4-key silicone rubber

• Weight:

Approx. 325 g (12 oz.)

Display:
• Alphanumeric

2 x 16 LCD

• Display update rate:

1 second

• Contrast:

User selected, 5 levels

Electrical
Power:

12 to 24 VDC ±10% regulated,

31 mA max current

Current output:

4 to 20 mA, isolated, fully adjustable

and

reversible

Max loop impedance:

50 Ω max. @ 12V

325

Ω max. @ 18V

600

Ω max. @ 24V

• Update rate:

200 ms

• Output accuracy:

±0.03 mA

Open-collector output:
• Optically isolated, 50 mA max. sink

• 30 VDC maximum pull-up voltage.
• Programmable for:
• High, Low with adjustable hysteresis
• Pulse operation (maximum pulse rate: 400 pulses/min).
Environmental
• Operating temperature:

-10 °C to 70 °C (14 °F to 158 °F)

• Storage temperature:

-15 °C to 80 °C (5 °F to 176 °F)

• Relative humidity:

0 to 95%, non-condensing

• Maximum altitude:

2000 m (6562 ft)

• Insulation category:

• Pollution degree:

• Rating:

NEMA 4X/IP65 front

Standards and Approvals:
• CE, UL listed
• Immunity:

EN50082-2

• Emissions:

EN55011 Class B

• Manufactured under ISO 9001 for Quality, ISO 14001

for Environmental Management and OHSAS 18001 for
Occupational Health and Safety.

Declaration of Conformity according to FCC Part 15

This device complies with Part 15 of the FCC rules. Operation
is subject to the following two conditions:
(1) This device may not cause harmful interference, and,
(2) This device must accept any interference received, including
interference that may cause undesired operation.

China RoHS (Go to www.gfsignet.com for details)

Output -

Output +

System Pwr
Loop -

System Pwr
Loop +

Sensr Gnd

(SHIELD)

Sens

r IN

(RED)

Sensr V+

(BLACK)

quick-clips

gasket

panel

terminals

mounting

bracket

latch

Panel Mount
Installation Detail