GF Signet 2540 Stainless Steel High Performance Flow Sensor - Manual (Page 12)

Georg Fischer Signet LLC, 3401 Aero Jet Avenue, El Monte, CA 91731-2882 U.S.A. • Tel. (626) 571-2770 • Fax (626) 573-2057
For Worldwide Sales and Service, visit our website: www.gfsignet.com • Or call (in the U.S.): (800) 854-4090
For the most up-to-date information, please refer to our website at www.gfsignet.com
3-2540.090 Rev. F 11/12 English © Georg Fischer Signet LLC 2012
Mfr. Part No. Code
3-2540-1 198 840 035
3-2540-2 198 840 036
3-2540-3 198 840 037
3-2540-4 198 840 038
11. Ordering Information
Mfr. Part No. Code Description
3-1500.663 198 820 008 Hot-Tap Installation Tool
1220-0021 198 801 000 O-ring, FPM
1224-0021 198 820 006 O-ring, EPDM
1228-0021 198 820 007 O-ring, FFPM
3-2540.321 159 000 623 Rotor Kit, 2540 Tungsten Carbide Pin
3-2540.322 159 000 864 Rotor kit, Stainless Steel pin
P52504-3 159 000 866 Rotor pin, Tungsten Carbide
P52504-4 159 000 867 Rotor pin, 316 SST
3-2540.520 159 000 648 Bearing, PTFE
P52527 159 000 481 Retainers, SS (1.4401)
3-2541.260-1 159 000 849 Standard replacement electronics module
3-2541.260-2 159 000 850 Hot-Tap replacement electronics module
5523-0222 159 000 392 Cable, per ft.
P51589 159 000 476 Conduit Adapter Kit
P31934 159 000 466 Conduit Cap
Accessories and Replacement Parts
Mfr. Part No. Code
3-2540-1S 159 001 501
3-2540-2S 159 001 502
3-2540-3S 159 001 503
3-2540-4S 159 001 504
Sensor Part Number
3-2540 Stainless Steel High Performance fl ow sensor with removable electronics
Mounting option - choose one
-1 1½ inch NPT thread
-2 1½ inch ISO thread
-3 1½ inch NPT thread, hot tap design*
-4 1½ inch ISO thread, hot tap design*
Rotor Pin Material
- Tungsten Carbide
-S Stainless Steel
3-2540 -1 Example Part Number
*Must use 3-1500.663 Hot-Tap installation tool (ordered separately)