Burkert Type 8045 - Manual (Page 56)

52
Operatingandfunctions
8.6.17. Setting the brightness of the display and how long it stays
on, or deactivating the backlight
This parameter makes it possible:
• to adjust the brightness of the display and how long the display is backlit after a key press.
• to deactivate the backlight.
BACKLit BKLG= 1
END
→
Set the display brightness, from 1 to 9.
BKLG= 9
BKLG OFF
0......9
→
Or, deactivate the backlight.
→
Confirm
DELAY= 30
→
Set the duration the display is backlit after a key press
(00 s: the display is constantly backlit).
→
Confirm
END
Fig. 53: Diagram of the "BACKLIT" parameter of the Parameters menu
→
If you do not want to adjust another parameter, confirm the "END" parameter to save the settings or not and
go back to the Process level.
English
Type 8045