Burkert Type 3004 - Manual (Page 5)

5
Correctuse
2. CORRECT USE
Incorrect use of the electromotive rotary actuator can be dan-
gerous to people, nearby equipment and the environment.
• The rotary actuator can be used indoors, e.g. to actuate fittings,
especially ball valves or shut-off flaps.
• During use observe the permitted data, the operating conditions
and conditions of use specified in the contract documents and
operating instructions, as described in chapter “6. Technical
data”.
• The device may be used only in conjunction with third-party
devices and components recommended and authorized by
Bürkert (e.g. ATEX - Approved components).
• Correct transportation, correct storage and installation and
careful use and maintenance are essential for reliable and
problem-free operation.
• Use the device only as intended.
2.1. Restrictions
If exporting the system/device, observe any existing restrictions.
3. GENERAL SAFETY INSTRUCTIONS
These safety instructions do not make allowance for any:
• Contingencies and events which may arise during the installation,
operation and maintenance of the devices.
• Local safety regulations; the operator is responsible for observing
these regulations, also with reference to the installation personnel.
DANGER!
Risk of electric shock!
There is a serious risk of injury when reaching into the device.
• Before reaching into the device, always switch off the power
supply and safeguard to prevent re-activation!
• Connect several electromotive rotary actuators always with
phase separation via a switch.
• Protect the device with a mains-operated fuse.
• Observe applicable accident prevention and safety regulations
for electrical equipment!
Danger of explosion!
For specific device designs there is a risk of explosion if the
device is opened in the explosion-protected area.
• Follow the safety instructions on the rating plate!
english
Type 3004