Burkert Type 8650 - Manual (Page 9)

9
NOTE!
Operate.the.system.with.direct.current.only!.
To avoid damaging the system, use only direct current as the power supply for the system.
Avoid.pressure.drop!.
To avoid a pressure drop, the compressed air supply to the system must be as large as possible.
Electrostatic.sensitive.components./.modules!
• The device contains electronic components which react sensitively to electrostatic discharge (ESD). Contact
with electrostatically charged persons or objects is hazardous to these components. In the worst case scenario,
they will be destroyed immediately or will fail after start-up.
• Observe the requirements in accordance with EN 61340-5-1 and 5-2 to minimise or avoid the possibility of
damage caused by sudden electrostatic discharge!
• Also ensure that you do not touch electronic components when the power supply voltage is present!
Type 8650
english
Allgemeine Informationen
Sicherheitshinweise