Burkert Type 8650 - Manual (Page 68)

68
6. REMOVAL / INSTALLATION OF INDIVIDUAL
SEGMENTS
6.1. Removal
Supply.segments
→
Release required module by actuating the locking element and swivel out.
→
In the case of the pressure gauge module ensure that the hose is disconnected from the pneumatic module
(see figure: Hose connection of the pressure gauge module).
Fig. 10: Removal / installation of a supply segment
Valve.segments
→
Remove valves and any protective caps from the plug-in contacts (either depressurized or all affected loca-
tions with P-shutoff).
→
Release the electronic module by actuating the locking element in the direction of the arrow and swivel out the
module (see figure: Removal / installation of the valve segment).
entriegeln
Fig. 11: Removal / installation of a valve segment
Type 8650
english
Installation