Burkert Type 8650 - Manual (Page 60)

60
NOTE!
Operate.the.system.with.direct.current.only!.
To avoid damaging the system, use only direct current as the power supply for the system.
Avoid.pressure.drop!.
To avoid a pressure drop, the compressed air supply to the system must be as large as possible.
Electrostatic.sensitive.components./.modules!
The device contains electronic components which react sensitively to electrostatic discharge (ESD). Contact
with electrostatically charged persons or objects is hazardous to these components. In the worst case scenario,
they will be destroyed immediately or will fail after start-up.
• Observe the requirements in accordance with EN 61340-5-1 and 5-2 to minimise or avoid the possibility of
damage caused by sudden electrostatic discharge!
• Also ensure that you do not touch electronic components when the power supply voltage is present!
Restrictions!.
Observe the applicable restrictions for the conversion / expansion of systems..
• Read.about.this.in.the.chapter.“Structure.and.function.of.the.AirLINE.Ex.system”,.section.“Maximum.
system.expansion”).
Type 8650
english
Installation