Burkert Type 8650 - Manual (Page 70)

70
7. REMOVAL / INSTALLATION OF THE COVER
FLAPS
7.1. Installation
To install the cover flap, attach it in the half swiveled open position and then push it into the hinge contour until
it engages.
Fig. 13: Attaching the cover flap
7.2. Removal
Swivel open the cover flap and carefully lift the hinge plate over the hinge contour (e.g. using a small cross-
head screwdriver).
Fig. 14: Engaging the cover flap
The cover flaps have no effect on the function of the system and can be omitted or removed if required.
Type 8650
english
Installation