Burkert Type 8650 - Manual (Page 110)

110
2. PACKAGING, TRANSPORT
NOTE!
Transport.damages!
Inadequately protected equipment may be damaged during transport.
• During transportation protect the device against wet and dirt in shock-resistant packaging.
• Avoid the action of heat and cold which can lead to temperatures above or below the admissible storage
temperature.
• Protect the electrical interfaces and pneumatic connections from damage by placing protective caps on them.
2.1. Transport Conditions for Modules in Original
Packaging
The following information applies to modules transported in their original packaging.
Requirement Admissible.range
Free fall ≤1 m
Temperature -40 to +70 °C
Temperature change 20 K/h
Atmospheric pressure 1080 to 660 hPa (corresponding to an altitude of -1000 m to +3500 m)
Relative humidity 5 to 95 %, non-condensing
AirLINE Ex surpasses the requirements of IEC 61131-2 regarding transport conditions.
3. DISPOSAL
→
Dispose of the device and packaging in an environmentally friendly manner.
NOTE!
Damage.to.the.environment.caused.by.device.components.contaminated.with.media.
• Observe the relevant disposal and environmental protection regulations.
Note:.
Observe national waste disposal regulations.
Type 8650
english
Storage, Packaging,
Transport, Disposal