Removing a system from a profile rail, Installation.on.s7.profile.rail, Pre-assembled.system) – Burkert Type 8650 User Manual
Page 63: . removing.a.system.from.a.profile.rail
![background image](/manuals/330101/63/background.png)
63
3.
INSTALLATION ON S7 PROFILE RAIL
(PRE-ASSEMBLED SYSTEM)
3.1.
Removing a System from a Profile Rail
→
Loosen all clamping bolts (1) on the connection modules (turn counter-clockwise)
→
Swivel system out of the profile rail.
→
Bring all clamping bolts (1) on the connection modules to the home position (by turning them counter-
clockwise all the way).
→
Hook the system in the required position on the upper edge of the profile rail and swivel open.
→
Tighten all clamping bolts (1) by turning them clockwise (stipulated torque 1.5 Nm).
Fig. 5:
Mounting on to the profile rail
Type 8650
english
Installation