Burkert Type 8650 - Manual (Page 67)

67
5.2. Conversion and Expansion
→
Loosen the clamping bolts (1) on the right supply segment.
→
Loosen the two inclined tie rods (3)
→
Push the supply segment to the right.
→
In the same way more segments can be moved until the position is reached in which the system is to be
changed.
→
When a segment is added, first hook it into the upper edge of the profile rail.
→
Swivel in the segment and push it to the left up to the existing subsystem.
3..
Inclined tie rods
Fig. 9: Dock the segment to the system
5.3. Assembly
→
Reassemble the system in reverse order.
Type 8650
english
Installation