Burkert Type 8686 - Manual (Page 31)

31
Controlanddisplay
10 cOnTrOl anD Display
10.1 control and display elements for
feedback head Type 8685
10.1.1 Device version 24 V Dc
The items listed below are designed separately for actuator 1 and 2.
display elements:
• Status of actuator (end position)
The display elements are designed in the form of an LED.
control elements:
• DIP switch for selecting actuator size RV50, RV70, RV110
• Slide switch for color selection of end position
If the transparent cap is unscrewed, follow the instructions
in “Step 4: Closing the transparent cap / body casing”,
page 36.
DIP switch -
actuator 1
DIP switch -
actuator 2
Slide switch
Color selection of end position
Actuator 2 Slide switch
Color selection of end position
Actuator 1
LEDs
Status of actuator 2
(end position) LEDs
Status of actuator 1
(end position)
Fig. 25: Control and display elements for 24 V DC feedback head
English
Type 8685 / 8686