Burkert Type 8686 - Manual (Page 10)

10
Technicaldata
5.5 structure of adapter set for
actuator Type 2036
2
5
4
1
7
6
3
9
8
Fig. 3: Adapter set for Type 2036
item Quantity designation
1 1 Robolux adaptation body
2 6 2 units each Switch spindle RV50, RV70, RV110 cpl.
3 1 O-ring 52 x 3 EPDM 75
4 1 Form seal
5 2 Cylinder head screw M6 x 12 A2 DIN 912
6 2 Cylinder head screw M4 with shaft
7 2 O-ring 3.5 x 1.5 EPDM 70
8 2 Hose 280 mm
9 4 Angular connection G1/8 SL6 Legris
Tab. 1: Parts list for adapter set
6 Technical DaTa
6.1 conformity
The feedback head Type 8685 and the control head Type 8686 comply
with EC directives in accordance with the EC Declaration of Conformity.
6.2 standards
The applied standards, which verify conformity with the EC Direc-
tives, can be found on the EC Type Examination Certificate and / or
the EC Declaration of Conformity.
6.3 Operating conditions
Warning!
solar radiation and temperature fluctuations may cause mal-
functions or leaks.
▶ If the device is used outdoors, do not expose it unprotected to
the weather conditions.
▶ Ensure that the permitted ambient temperature does not exceed
the maximum value or drop below the minimum value.
Ambient temperature 0 – +55 °C
Degree of protection IP65 / IP67 according to EN 60529
(only if cables, plugs and sockets have been
connected correctly and in compliance with
the exhaust air concept in chapter “8.3 Pneu-
matic installation of control head Type 8686”
.
English
Type 8685 / 8686