eLine Technology iVMS-4000 V2.03 - Manual (Page 82)

User Manual of iVMS-4000(V2.03)
 Select
to enable NTP function. Tick
Note: Time Synchronization Interval: 0~10080
(default 60min).
If the device connect
min
ed to the public network, the IP
address of NTP server provided by carrier can be input in
the blank “Server Address”;
If the device connected to private network, the IP
address of NTP server built by NTP software can be input
the blank “Server Address”.
9.1.3.5 Net Disk
By Net Disk Settings, recorded data can be saved to the network storage disk provided by NAS server.
Select 
Input the IP a ver
saving path allocated by NAS server in
the
ddress of NAS server in the blank “Ser
IP address”; input the
blank “File Path”.
Note:
1, Make sure that the device supports NFS function
NAS server allocated the storage space correctly.
2, If select the ISCSI, the
and
device should be 90 / 91 series
DVR with version 1.2 or higher, and the 95 / 96 series NVR.
9.1.3.6 E-Mail
Through E-mail configuration, the e-mail can be sent to the designated mailbox when there is an alarm.
 Select
If serv is nee . er authentication ded, enable it (i.e ) and
an enable “Attachment” (i.e.
input user name and password.
Input the sender and recipient information, if need to
send picture, you c ).
Note: Make sure that the device supports email
nction.
function and NAS server allocated the storage space
correctly. DS-9000 device does support email fu
81