eLine Technology iVMS-4000 V2.03 - Manual (Page 34)

User Manual of iVMS-4000(V2.03)
5.6 Hardware Decode
If there is video/audio decoding card installed in the computer, then this function can be available.
5.6.1 Hardware Decode Configuration
Before hardware decode on TV Wall, user needs to configure the card output and window division mode, or
else it will use the default decode mode.
Click key and then on the right to enter the configuration interface
The decoding card installed in the PC can be recognized and initialized automatically as iVMS software
starts up, and the information will be displayed in the decoding card info area. The icon means which video
output of the decoding card will be used to duplicating by the icon.
The area descriptions are as follows:
Area Instruction
Configuration Area: 2 options including Video Output Standard & Decode Mode.
Decoding Card Info Area: Show the information of the decoding cards and channels.
Output Window Area: Configure the output mode of decoding channels.
Window Division Mode Select Area: Select window division mode.
33