eLine Technology iVMS-4000 V2.03 - Manual (Page 73)

User Manual of iVMS-4000(V2.03)
3 rd step: Set the motion detection area and
sensitivity.
Enable “Start Draw”, and select the detection area by
using mouse.
The sensitivity 1 and 6 are the lowest and the
highest level.
4 th step: Set the detection time.
week,
ents for one day.
“Arm Schedule” can be one day or the whole
and 8 segm
72
Alarm Linkages Description:
Linkage Description
Warning on Monitor
When the alarm signal is detected, the image of corresponding channel will
pop out as single screen.
Audio Warning Alarm triggers buzzer
5 th step: Set the alarm linkage for motion detection
and select alarm output channel.