eLine Technology iVMS-4000 V2.03 - Manual (Page 74)

User Manual of iVMS-4000(V2.03)
Upload to Center Upload the alarm signal to the center, such as client software
E-mail Linkage
When the alarm signal is
the des
detected, the client software will send the email to
ignated mailbox.
Trigger Alarm Output
Trigger alarm output of the device; if the device is DS-9000 series, triggering
alarm output of IP channel can be selected as well.
9.1.2.2 Signal Level Alarm
Select 
1 st st ep: Select alarm input.
Note: If the device is D
can click “Switch to IP channel” t
input
S-9000 series DVR, you
o configure the alarm
of IP channel.
2 nd step: Select the type of alarm input, “NO” or
“NC”.
Note: The settings will become effective after
rebooting.
73