eLine Technology iVMS-4000 V2.03 - Manual (Page 46)

User Manual of iVMS-4000(V2.03)
6.7 Keyboard and Joystick Control
The iVMS client supports keyboard (DS-1002KI, DS-1003KI) and joystick control PTZ and preview window
layout.
Connect Ta, Tb of DS-1002KI, DS-1003KI keyboard to Rx+, Rx- of RS-485 RS-232 converter, then connect
converter to COM interface of computer.
Keyboard connect configuration
Click   , and select keyboard serial
ports (None by default) in “Other Configuration”. Click to save parameters
Keyboard control
Press “EXIT” button on the keyboard to switch control
state. A message “Controlling window layout” will pop up
afterwards, and then you can move the green active box
by using keyboard joystick.
Press “PTZ control” button on the keyboard to control
iris, focus, zoom, wiper, light, and preset calling by using
joystick or function buttons.
Press “EXIT” button on the keyboard to switch control
state. A message “Controlling PTZ” will pop up afterwards,
and then you control PTZ by using joystick.
Under the TV Wall Interface, press the buttons of the DS-1003KI keyboard in turn to select the output
window division, ”Monitor”->”Number of the decoder sub window ” ->”OK”
Press the buttons of the 1003KI keyboard in turn to select the decode channel, “Channel”->”Channel
ID”->”OK”
Note: the “Shift” button is the key to switch PTZ control and window shift when it connect to DVR. When
using DS-1002KI, DS-1003KI keyboard connected to PC, the software define “ESC” button of the keyboard to be
switch function.
45