eLine Technology iVMS-4000 V2.03 - Manual (Page 70)

User Manual of iVMS-4000(V2.03)
69
9.1.1.4 Alarm Recording
 Select
1
st step: Select alarm input.
Note: If the device is DS-9000 series DVR, you
can click “Switch to IP channel” to configure the alarm
input of IP channel.
2 nd step: Se lect the type of alarm input, “NO” or
“NC”.
Note: The settings will become effective after
rebooting.
3 s
S
rd tep: Enable “Alarm Handle” to activate “Arm
chedule” & “Linkage Method”.