Datamax-O'Neil microFlash 2te Quick Reference Programming Guide - Manual (Page 36)

Using Easy Print Mode
32
Datamax-O’Neil Quick Reference Programming
Three-Letter Configuration Commands
TCP/IP 802.llb and Bluetooth Wireless configurations. Versions 5.13 and 6.13 and later only:
Configure Default Values {CDV}
{
A left bracket begins the command set.
CDV Reverts to non user-specific default values at time of manufacture for
configuration parameters.
} A right bracket ends the command set.
Restore Default Values {RDV}
{
A left bracket begins the command set.
RDV Restores all configuration parameters to those stored by the SDV
command.
} A right bracket ends the command set.
Stores Default Values {SDV}
{
A left bracket begins the command set.
SDV Stores an image of the current parameter values in separate area of
Flash. See RDV to restore the parameters to those values stored by
SDV.
} A right bracket ends the command set.