Datamax-O'Neil microFlash 2te Quick Reference Programming Guide - Manual (Page 31)

Using Easy Print Mode
27
Datamax-O’Neil Quick Reference Programming
Configure Baud Rate {CB:nn} Original
MF2, MF3, 2t, 4t
Radio Ready
2t, 3l, 4t
{ A left bracket begins the command set.
CB:nn Configures the baud rate. Use the
following values to specify the baud rate:
nn=00: 1200 BAUD
nn=01: 2400 BAUD
nn=02: 4800 BAUD
nn=03: 9600 BAUD (default)
nn=04: 19.2K BAUD
nn=05: 38.4 BAUD
nn=06: 57.6 BAUD
nn=07: 115.2K BAUD
nn=08: 230.4K BAUD
nn=09: 460.8K BAUD
nn=10: 921.6K BAUD (not guaranteed)
X (MF2/MF3)
X
X (MF2/MF3)
X
X (MF2/MF3)
X
X
X
X
X
X
X
X
X
} A right bracket ends the command set.
Configure Print Darkness {CD:nn} Original
MF2, MF3, 2t, 4t
Radio Ready
2t, 3l, 4t
{ A left bracket begins the command set.
CD:nn Configures print darkness (aka burn
adjust). The value of nn is normal plain
paper.
nn=-25: -25% (for very sensitive stock)
nn=-20: -20%
nn=-15: -15%
nn =-10:-10%
nn =-05:-5%
nn = 00: 00 (default - for "regular" stock)
nn = 05:+5%
nn = 10: +10%
nn = 15:+15%
nn = 20: +20%
nn = 25: +25%
nn = 30: +30%
nn = 35: +35% (for high temp stock)
X X
} A right bracket ends the command set.