Datamax-O'Neil microFlash 2te Quick Reference Programming Guide - Manual (Page 18)

Using Easy Print Mode
14
Datamax-O’Neil Quick Reference Programming
Line Printer Mode
Self-Test Printout
Status
Line Printer Mode {LP}
{
A left bracket begins the command set.
LP LP puts the printer into Line Printer mode.
Note: Do not send additional characters for 500ms (is this
the time period?) after sending this command (need more
info. Why not?)
} A right bracket ends the command set.
Self-test Printout {TP}
{
A left bracket begins the command set.
TP TP commands a self-test printout.
} A right bracket ends the command set.
Limited Self-test Printout {TP1}
{
A left bracket begins the command set.
TP1 TP1 commands a limited self-test printout.
} A right bracket ends the command set.
Alternate Self-test Printout {TP:xxx}
{
A left bracket begins the command set.
xxx xxx : (0 - 255)
xxx = 0 will print only the normal self-test
xxx = 001 will print the stored format named TP001
xxx = 002 will print the stored format named TP002
through xxx = 255
The type of self-test (value of xxx) is returned in the
configuration command {CF?}
} A right bracket ends the command set.
Status {S}
{
A left bracket begins the command set.
S Returns an Easy Print status string.
} A right bracket ends the command set.