Analog Way Eikos User Manual
Page 77
Memorizing Frames in the Eikos
1. In the Input Selection section, click on the source
button (
#
1 to
#
12) of the source you wish to record
as a frame.
2. Click on the Logos/Frames tab of the RCS
interface. Then click on the Record Frame button.
3. Click on the field next to the first free Frame to
select it.
4. Click on the Execute button.
Working with Logos
It is possible to store up to 8 logos in the
Eikos non volatile memory. Logos work in much the same way as
frames, and can be recorded from any of the
Eikos’ 12 sources.
Logos have more attributes than frames. They can be sized, positionned, but also keyed via color cutout
selection or Luma Key.
Memorizing Logos
1. In the Input Selection section, click on the source
button (
#
1 to
#
12) of the source you wish to record
as a logo.
2. In the Logos/Frames tab, click on Record Logo,
then select an empty logo memory slot (
#
1 to
#
8)
to record your logo into.
3. Adjust position, size and keying attributes for your
logo.
4. Click Execute to record your logo into the selected
memory slot. The
Eikos RCS will display a
progress bar while recording the logo.
5. In the Input Selection section, click the LOGO1 button, and select logo number (
#
1 to
#
8) you wish to use.
Your logo will appear on the preview screen above any existing layer on screen.
6. Click the TAKE button. Your logo will appear on the main display.
75