Analog Way Eikos User Manual

Page 56

Output selection settings

To set up the outputs, go in the

Output #1

Output #2

menu and choose first the appropriate format/reso-

lution and then the adapted rate for your screens by using the knob button and the Enter button.

Output# → Output Format → Output rate

You can also in the

Output #2

menu, synchronise all the changes from the

Output #1

to the

Output #2

checking the case

Synch w/Out 1

. It allows you to set up both outputs at the same time.

Output #2 → Synch w/Out 1

Try to use the native resolution of your screens/projectors in order to obtain the best image quality.

* NOTE *: The output status can provide you all information about the output in real time. This feature is

particularly needed when HDCP is used thanks to the HDCP status.

*All changes have to be validated by pressing the OK button in order to be saved*

Video Out

Native Matrix mode, the menu “connection mode” allows you to choose recording Output #1 or Output #2.

Display Mode

Presentation

Availability

Output #1

Output #1 & #2 side by side

YES

Matrix Mode only

YES

Matrix Mode only

OUT #1

Output #2

Output #1 & #2 Top and Bottom

OUT #2

Menu→ Video Out → Connection →

Output #1

Menu→ Video Out → Connection →

Output Titled Horizontally

Menu→ Video Out → Connection →

Output Titled Vertically

Menu→ Video Out → Connection →

Output #2