Analog Way Eikos - Manual (Page 62)

You can also load a preset directly through the front panel using the presets button:
Press P # 1 to # 4 or Press shift then P # 5 to # 8 to load the preset directly to the preview screen
In the Preset menu, you have access to the Step Back feature which allows recalling the last preset on the
preview screen.
Only one logo is available for display in Quadravision Mode.
Working with Frames/Logos
Presets are the copy of a configuration. To save it:
Go in the Preset menu → save preset → select the origin and the destination, press ENTER
to confirm
To load it:
Go in the Preset menu → load preset → select the destination, press ENTER to confirm
Creating a Preset
Presets are useful to recall all layers/windows settings pressing just one button. In presets, you’ll save posi-
tion, size, transparency, source attached, etc... (Layers settings).
The source settings as colours, zoom, etc... are not saved into a preset.
You can recall a preset at any time. It will be displayed on your preview in order to check the content before
taking it on the main screen.
Working with Presets
60