Atec Agilent-E8361A - Manual (Page 9)

9
E8362/3/4B
Corrected system performance with 3.5 mm connectors
Description Specification (dB)
45 MHz to 2 GHz 2 to 20 GHz 2 to 26.5 GHz
Directivity 8
Source match 0 1 1
Load match 8
Reflection tracking ±0.00 (+0.0/°C) ±0.006 (+0.0/°C) ±0.006 (+0.0/°C)
Transmission tracking ±0.009 (+0.0/°C) ±0.088 (+0.0/°C) ±0.10 (+0.0/°C)
Transmission uncertainty (specifications)
Reflection uncertainty (specifications)
Magnitude
0.01
0.1
1
10
-90 -80 -70 -60 -50 -0 -0 -0 -10 0 10
Transmission coefficient (dB)
Uncertainty (dB
)
E86xB full two port cal using 8505B
S11 = S = 0
Source power = -1 dBm
5 MHz to GHz
to 0 GHz
0 to 6.5 GHz
Phase
0.1
1
10
100
-90 -80 -70 -60 -50 -0 -0 -0 -10 0 10
Transmission coefficient (dB)
Uncertainty (degrees)
E86xB full two port cal using 8505B
S11 = S = 0
Source power = -1 dBm
5 MHz to GHz
to 0 GHz
0 to 6.5 GHz
Magnitude
0
0.01
0.0
0.0
0.0
0.05
0 0. 0. 0.6 0.8 1
Reflection coefficient (linear)
Uncertainty (linear)
E86xB with 8505B
S1 = S1 = 0
Source power = -1 dBm
5 MHz to GHz
to 0 GHz
0 to 6.5 GHz
Phase
0
6
8
10
0 0. 0. 0.6 0.8 1
Reflection coefficient (linear)
Uncertainty (deg)
E86xB with 8505B
S1 = S1 = 0
Source power = -1 dBm
5 MHz to GHz
to 0 GHz
0 to 6.5 GHz
Standard configuration and standard power range (E8362B)
Applies to E8362B PNA Series analyzer,
85052B (3.5 mm) calibration kit, 85131F flexible
test port cable set, and a full two-port calibra-
tion. (Specifications apply over environmental tem-
perature of 23 °C ±3 °C, with less than 1 °C devia-
tion from calibration temperature.)