Atec Agilent-E8361A - Manual (Page 62)

6
Test port cable specifications
Connector Type Frequency Length Return Insertion loss Stabillty 1, ±Phase
(Test port to device) (GHz) cm (inch) loss (dB) (f in GHz) ±magnitude (degrees)
Single cables for
8719 and 8720 (3.5 mm)
8511C semi-rigid cable .5 mm to DC to 6.5 81 () ≥17 dB 0. √f +0. <0.06 dB 0.16 (f) +0.5
PSC-.5 mm (f) (.5 dB at fmax)
8511E flexible cable .5 mm to DC to 6.5 96.5 (8) ≥16 dB 0.5 √f +0. <0. dB 0.16 (f) +0.8
PSC-.5 mm (f) (.1 dB at fmax)
851C semi-rigid cable .5 mm to 7 mm DC to 18 81 () ≥17 dB 0.5 √f +0. <0.06 dB 0.16 (f) +0.5
(1.8 dB at fmax)
851E flexible cable .5 mm to 7 mm DC to 18 97. (8.5) ≥17 dB 0 5 √f +0. <0. dB 0.16 (f) +0.8
(1.8 dB at fmax)
Cable sets for
8719 and 8720 (3.5 mm)
8511D semi-rigid cable set .5mm to DC to 6.5 5 (1) ≥16 dB 0.0 √f +0. <0.06 dB 0.16 (f) +0.5
PSC-.5 mm (f) or (1.8 dB at fmax)
.5 mm (m)
8511F flexible cable set .5 mm to DC to 6.5 5 (1) ≥16 dB 0.5 √f +0. <0.1 dB 0.1 (f) +0.5
PSC-.5 mm (f) or (1.5 dB at fmax)
.5 mm (m)
851D semi-rigid cable set .5 mm to 7 mm DC to 18 5 (1 ) ≥17 dB 0.5 √f +0. <0.06 dB 0.16 (f) +0.5
(1. dB at fmax)
851F flexible cable set .5 mm to 7 mm DC to 18 5 (1) ≥17 dB 0.5 √f +0. <0.1 dB 0.1 (f) +0.5
(1. dB at fmax)
Single cables for
8722 (2.4 mm)
851C semi-rigid cable . mm to DC to 50 81 () ≥15 dB 0.8 √f +0. <0.06 dB 0.18 (f)
PSC-. mm (f) (5.6 dB at fmax)
851E flexible cable . mm to DC to 50 11 () ≥1.5 dB 0.58 √f +0.5 <0.5 dB 0.8 +0.16 (f)
PSC-. mm (f) (.5 dB at fmax)
851C semi-rigid cable . mm to DC to 6.5 81 () ≥16 dB 0.6 √f +0. <0.06 dB 0.18 (f)
PSC-.5 mm (f) (.7 dB at fmax)
851E flexible cable . mm to DC to 6.5 97. (8.5) ≥16 dB 0.6 √f +0. <0. dB 0.16 (f) +0.8
PSC-.5 mm (f) (.7 dB at fmax)
8515C semi-rigid cable . mm to 7 mm DC to 18 81 () ≥17 dB 0.6 √f +0. <0.06 dB 0.18 (f)
(.5 dB at fmax)
8515E flexible cable . mm to 7 mm DC to 18 97. (8.5) ≥17 dB 0.6 √f +0. <0. dB 0.16 (f) +0.8
(.5 dB at fmax)
1. Phase stability of semi-rigid/flexible cables is specified with a 90-degree bend and a "/" radius.
. Cable length and stability are supplemental characteristics.
. Special rugged female connector specifically for connecting to the network analyzer test port. Does not mate with a standard male connector.