Atec Agilent-E8361A - Manual (Page 36)

6
E8361A
Test port output
Description Specification Option 014 Option UNL Supplemental
Standard and Option 014 information
Frequency range
E861A 10 MHz to 67 GHz (Operation up to 70 GHz)
Nominal power 1 -15 dBm -15 dBm -17 dBm
Frequency resolution 1 Hz 1 Hz 1 Hz
CW accuracy ± 1ppm ± 1ppm ± 1ppm
Frequency stability ± 0.05 ppm -10 to 70 °C, typical
±0.1 ppm/yr maximum, typical
Power level accuracy 2
10 to 5 MHz ±1.5 dB ±1.5 dB ±1.5 dB
5 MHz to 10 GHz ±1.5 dB ±1.5 dB ±1.5 dB Variation from nominal
10 to 0 GHz ±1.5 dB ±1.5 dB ±.0 dB power in range 0
0 to 0 GHz ±.0 dB ±.0 dB ±.5 dB
0 to 0 GHz ±.0 dB ±.0 dB ±.0 dB
0 to 5 GHz ±.0 dB ±.0 dB ±.0 dB
5 to 50 GHz ±.5 dB ±.5 dB ±.5 dB
50 to 60 GHz ±.0 dB ±.0 dB ±.0 dB
60 to 67 GHz ±.0 dB ±.0 dB ±.5 dB
67 to 70 GHz ±.0 dB ±.0 dB ±.5 dB
Power level linearity 4
10 to 5 MHz ±1.0 dB 5 ±1.0 dB 5 ±1.0 dB 5 For power ≤ -5 dBm
5 MHz to 67 GHz ±1.0 dB 5 ±1.0 dB 5 ±1.0 dB 5 Test reference is at the
67 to 70 GHz ±1.0 dB 5 ±1.0 dB 5 ±1.0 dB 5 nominal power level
(step attenuator at 0 dB)
Power range 2, 6, 7
Note: If the power is set above maximum specified leveled power,
the test port output signal may show non-linear effects that are dependent on the DUT.
10 to 5 MHz -5 to -9 dBm -5 to -9 dBm -75 to -9 dBm
5 to 500 MHz -5 to - dBm -5 to - dBm -75 to - dBm
500 to 750 MHz -5 to 0 dBm -5 to 0 dBm -75 to 0 dBm
750 MHz to 10 GHz -7 to -1 dBm -7 to -1 dBm -77 to -1 dBm
10 to 0 GHz -7 to - dBm -7 to - dBm -77 to - dBm
0 to 0 GHz -7 to -1 dBm -7 to - dBm -77 to -5 dBm
0 to 5 GHz -7 to -7 dBm -7 to -8 dBm -77 to -10 dBm
5 to 50 GHz -7 to -1 dBm -7 to - dBm -77 to -6 dBm
50 to 60 GHz -7 to - dBm -7 to - dBm -77 to -8 dBm
60 to 67 GHz -7 to -5 dBm -7 to -7 dBm -77 to -1 dBm
67 to 70 GHz -7 to -5 dBm -7 to -7 dBm -77 to -1 dBm
Power sweep range (ALC)
10 to 5 MHz 16 dB 16 dB 16 dB
5 to 500 MHz dB dB dB
500 to 750 MHz 5 dB 5 dB 5 dB ALC range starts at
750 MHz to 10 GHz 6 dB 6 dB 6 dB maximum leveled output
10 to 0 GHz 5 dB dB dB power and decreases by
0 to 0 GHz 6 dB 5 dB dB the dB amount specified
0 to 5 GHz 0 dB 19 dB 17 dB
5 to 50 GHz 6 dB 5 dB 1 dB
50 to 60 GHz dB dB 19 dB
60 to 67 GHz dB 0 dB 1 dB
67 to 70 GHz dB 0 dB 1 dB
Power resolution 0.01 dB 0.01 dB
1. Preset power.
. Test port output is a specification when the source is set to port 1, and a
characteristic when the source is set to port .
. Typical performance.
. Power level linearity is a specification when the source is set to port 1, and
a typical when the source is set to port .
5. ±1.6 dB for power > -5 dBm.
6. Power to which the source can be set and phase lock is assured.
7. Test port is specified into a nominal 50 Ω.