Atec Agilent-E8361A - Manual (Page 32)

E8361A
Corrected system performance with 2.4 mm connectors
continued
Description Specification (dB)
45 MHz to 2 GHz 2 to 20 GHz 20 to 40 GHz 40 to 50 GHz
Directivity 8 6
Source match 1 8 1
Load match 1 7 5
Reflection tracking ±0.001 (+0.0/°C) ±0.008 (+0.0/°C) ±0.00 (+0.0/°C) ±0.07 (+0.0/°C)
Transmission tracking ±0.00 (+0.0/°C) ±0.086 (+0.0/°C) ±0.1 (+0.0/°C) ±0.155 (+0.0/°C)
Transmission uncertainty (specifications)
Reflection uncertainty (specifications)
Magnitude
0.01
0.1
1
10
-90 -80 -70 -60 -50 -0 -0 -0 -10 0 10
Transmission coefficient (dB)
E861A fully optioned 1 full two port cal using 85056A
5 MHz to GHz
to 0 GHz
0 to 0 GHz
0 to 50 GHz
S11 = S = 0
Source power = -0 dBm
Un
ce
rta
in
ty
(d
B)
Phase
0.1
1
10
100
-90 -80 -70 -60 -50 -0 -0 -0 -10 0 10
Transmission coefficient (dB)
E861A fully optioned 1 full two port cal using 85056A
5 MHz to GHz
to 0 GHz
0 to 0 GHz
0 to 50 GHz
S11 = S = 0
Source power = -0 dBm
Un
ce
rta
in
ty
(d
eg
re
es
)
Magnitude
0
0.01
0.0
0.0
0.0
0.05
0 0. 0. 0.6 0.8 1
Reflection coefficient (linear)
E861A fully optioned 1 with 85056A
5 MHz to GHz
to 0 GHz
0 to 0 GHz
0 to 50 GHz
S1 = S1 = 0
Source power = -0 dBm
Un
ce
rta
in
ty
(l
in
ea
r)
Phase
0
6
8
10
0 0. 0. 0.6 0.8 1
Reflection coefficient (linear)
E861A fully optioned 1 with 85056A
5 MHz to GHz
to 0 GHz
0 to 0 GHz
0 to 50 GHz
S1 = S1 = 0
Source power = -0 dBm
Un
ce
rta
in
ty
(d
eg
re
es
)
Fully optioned (E8361A with options 014/UNL/080/081/016)
Applies to E8361A PNA Series analyzer, 85056A
(2.4 mm) calibration kit, 85133F flexible test
port cable set, and a full two-port calibration.
(Specifications apply over environmental temperature
of 23 °C ±3 °C, with less than 1 °C deviation from
calibration temperature.)
1. Configurable Test Set, Extended Power Range and Bias-Tees, Receiver Attenuators, Frequency Offset Mode, and
Reference Channel Transfer Switch (Option 01, UNL, 016, 080 and 081).