Atec Agilent-E8361A - Manual (Page 63)

6
Test port cable specifications
continued
Connector Type Frequency Length Return Insertion loss Stabillty 1, ±Phase
(Test port to device) (GHz) cm (inch) loss (dB) (f in GHz) ±magnitude (degrees)
Cable sets for
8722D (2.4 mm)
851D semi-rigid cable set . mm to DC to 50 5 (1 ) ≥15 dB 0.55 √f +0. <0.06 dB 0.16 (f)
PSC-. mm (f) or (.7 dB at fmax)
. mm (m)
851F flexible cable set . mm to DC to 50 7 (8) ≥1.5 dB 0.8 √f +0.5 <0.17 dB 0.8 + 0.16 (f)
PSC-. mm (f) or (.6 dB at fmax)
. mm (m)
851D semi-rigid cable set . mm to DC to 6.5 5 (1) ≥16 dB 0.1 √f +0. <0.06 dB 0.18 (f)
PSC-.5 mm (f) or (1.8 dB at fmax)
.5 mm (m)
851F flexible cable set . mm to DC to 6.5 5 (1) ≥16 dB 0.1 √f +0. <0.1 dB 0.1 (f) +0.5
PSC-.5 mm (f) or (1.8B dB at fmax)
.5 mm (m)
8515D semi-rigid cable set . mm to 7mm DC to 18 5 (1) ≥17 dB 0.1 √f +0. <0.06 dB 0.18 (f)
(1.5 dB at fmax)
8515F flexible cable set . mm to 7 mm DC to 18 6.9 (.75) ≥17 dB 0.1 √f +0. <0.1 dB 0.1 (f) +0.5
(1.5 dB at fmax)
Single cable for
PNA (1.85 mm)
N697E flexible cable 1.85 mm to DC to 67 96.5 (8) ≥15 dB 1.9 dB/ft at 65 GHz <0.1 dB <0.5° (f) + 0.09°
1.85 mm (f)
Cable set for
PNA (1.85 mm)
N697F flexible cable 1.85 mm to DC to 67 7 (8) ≥ 15 dB 1.9 dB/ft at 65 GHz <0.06 dB <0.5° (f) + 0.0°
1.85 mm (f)
1. Phase stability of semi-rigid/flexible cables is specified with a 90-degree bend and a "/" radius.
. Cable length and stability are supplemental characteristics.
. Special rugged female connector specifically for connecting to the network analyzer test port. Does not mate with a standard male connector.