Atec Agilent-E8361A - Manual (Page 50)

50
Microwave PNA Series
Rear panel
continued
Description Supplemental information
10 MHz reference in
Input frequency 10 MHz ±10 ppm, typ.
Input power –15 to +0 dBm, typ.
Input impedance 00 Ω, nom.
10 MHz reference out
Output frequency 10 MHz ±10 ppm, typ.
Signal type Sine wave, typ.
Output power 10 dB ± dB into 50 Ω, typ.
Output impedance 50 Ω, nom.
Harmonics < -0 dBc, typ.
Test set I/O 5-pin D-sub; available for external test set control
Handler I/O 6-pin, parallel I/O port; all input/output signals are default set to negative logic;
can be reset to positive logic via GPIB command
Auxiliary I/O 5-pin D-sub male connector; analog and digital I/O
Bias tee inputs
Connectors BNC (f), for port 1 and port
Maximum voltage ±0 V DC
Maximum current ±00 mA with no degradation of RF specifications
Fuse 500 mA, bi-pin style
The following connectors/connections are located on the Intel ® 1.1 GHz Pentium ® M CPU
VGA video output 15-pin mini D-Sub; Drives VGA compatible monitors
GPIB Two ports: dedicated controller and dedicated talker/listener -pin D-sub (Type D-),
female; compatible with IEEE-88
USB port 1 port on front panel and ports on rear panel.
LAN 10/100 BaseT Ethernet; 8-pin configuration auto selects between the two data rates